Davis Legend 27RU 600X1000 Free Standing Server Cabinet (Flat Pack)
- Brand: Davis Legend
- Product Code: CBN-SV-27RU1000
- SKU: SCB-PKST-01-27U610-CBK
Server Cabinet 27U
For the placement of servers and other network equipment to provide a good and stable operating environment.
Static load: 1000kg (adjustable feet)
With a slightly curved front door, a double back door, and a rotation angle of 140 degrees, this server cabinet provides a ventilation rate of more than 74%, providing adequate cooling for the system.
There are square holes with M6 mounting holes for easy installaion. With U logarithmic scale representation, it’s easy to place devices anywhere you want.
Front, back, and side doors can be easily disassembled, the side door has a two-stage design to reduce the weight load of the cabinet.
Convenient Locking Mechanism:
Pull and rotate the handle to open the door. Push the door back to lock the door with the key.
The double door is designed for to allow for small space equipment installation and maintenance.
Convenient Cable Entry:
Cable entry is at the top and bottom, with plastic stringing holes for cable commissioning and maintenance.
Quick & Friendly Installation:
Two people can install this cabinet using just 16 screws in only 6 minutes.
Lifetime Limited Warranty
The cabinet and accessories have lifetime limited warranty. This warranty includes parts and labor costs on all components found to be defective in material or workmanship under normal use, which shall not apply to products artificial damaged, modified or disassembled. Products to be repaired under this warranty must be returned to DAVISLEGEND or a designated service center with prior notification and the repairing quantity.
Rack Parts List
|1||Top cover||1||Pcs||1.2mm cold rolled steel||Powder coated||------|
|2||Under cover||1||Pcs||1.2mm cold rolled steel||Powder coated||About 2 Composition|
|3||Vertical cable management||2||Pcs||1.5mm cold rolled steel||Powder coated|
|4||Frame weldment||2||Pcs||1.2mm cold rolled steel||Powder coated|
|5||Column holder||4||Pcs||1.5mm cold rolled steel||Powder coated|
|6||Column||4||Pcs||2.0mm cold rolled steel||Powder coated||With screw|
|7||Side panel||4||Pcs||1.2mm cold rolled steel||Powder coated||With plastic side door lock|
|8||Front door||1||Pcs||1.2mm cold rolled steel||Powder coated||Curved metal punching single door,with lock, key|
|9||Rear door||1||Pcs||1.2mm cold rolled steel||Powder coated||Metal punching double doors with lock, key|
|10||Casters||4||Pcs||With the front brake casters 2|
|11||Ground Stud||10||Pcs||Cover a lower cover 5, rear doors, side door 4|
Kit: 42U: 40 sets, 40 sets of M6x12 square nut assembly
Note: cover, under cover, and doors connected to the ground terminal without a valid
Accessory Fitting List
|1||Side Door||4||1||High Quality Cold Rolled Steel Plate, 1.5mm||Static Plastic Coating||Two side doors, =27U, fitted with lock button.|
|2||Cantilever Plate||1||1||High Quality Cold Rolled Steel Plate, 1.5mm||Static Plastic Coating||Fitted with mounting screws|
|3||Shelf||1||1||High Quality Cold Rolled Steel Plate, 1.2mm||Static Plastic Coating||Fitted with mounting screws|
|4||Sliding Plate||1||1||High Quality Cold Rolled Steel Plate, 1.2mm||Static Plastic Coating||Fitted with mounting screws|
|5||Drawers with Lock 2U||1||1||High Quality Cold Rolled Steel Plate, 1.2mm||Static Plastic Coating||Fitted with mounting screws|
|6||Binding Wire Stents||1||1||High Quality Cold Rolled Steel Plate, 2.0mm||Static Plastic Coating||Fitted with mounting screws|
|7||Blank Plate||1||1||High Quality Cold Rolled Steel Plate, 1.2mm||Static Plastic Coating||Fitted with mounting screws|
|8||Cooling Fan||1||1||High Quality Cold Rolled Steel Plate, 0.8mm||Static Plastic Coating||Fitted with mounting screws|
|9||Screw M5||1||1||Black Coating||Static Plastic Coating||M5|
|10||Screw M6||1||1||Galvanized||Static Plastic Coating||M6|
|11||Screw M6||1||1||Galvanized||Static Plastic Coating||M6|
|12||PDU||1||1||Aluminum alloy, ABS Engineering Plastic||Level Mounted/Vertical Mounted|